Haze Remover is used to remove inks and all residues (GHOST ./images) which can still subsist on the mesh after washing with screenwash solvents. It can be used without danger on polyester but should not be left more than one hour on nylon. It is unsuitable for metallized mesh.

Apply Haze Remover on both sides of decoated and dry screens. Do not pour back into the container the remaining liquid in the squeegee because it could alter the quality of the product.

Let the Haze Remover stays for at least one hour. If old ink residues are on the mesh leave it longer (upto 24 hours for polyester fabrics) and then wash with water.

CAUTION - Irritant to eyes and skin. Avoid contact with eyes. In case of contact with eyes, flush immediately with water and seek medical advice. Wear appropriate gloves and eye/face protection equipment.